search here..

translate this page

*

welcome to my blog i hope u found something useful thanks for visit

What is the difference between the New iR-5000 Main Controller and the Old iR-5000 Main Controller?


      New Main Controller

        - Will have the serial number starting with MPMxxxxx.
        - Upgrading the PDL requires a Multi PDL Printer Kit -A2
        - The registration system software name for the firmware is "iR-5000d"
        - A press on the Counter Check key will cause the notation "d" for copier and "dn" for networked printer to be indicated in the lower
           left of the touch panel
        - A press on the Counter Check Key on the control panel will bring up the "Device Config.
        - This will cause various version information to be displayed.
        - Main Board version ( This will give part revision number of the Main controller PCB)
        - Controller Version (MN-CONT / BOOT-ROM / DC-CON)
        - Scanner Version (R-CON / FEEDER)
        - Finisher Version (Sorter/ SDL-STCH)
        - Device Information
        - The Main controller is based on PC133 Standards, the existing memory cannot be used on the new controller.
        - The new main controller only has One Boot Dimm Slot
        - Part Number for the New controller is FG6-7904-000 

 
    Old Main Controller

        - The machine will have serial number starting with NRFxxxxx
        -Multi Printer Board Kit A-1 is used.
        - The registration system software name for the firmware is "iR-5000"
        -The old main controller has 2 Boot Dimm Slots.
        - The old main controller is based on the PC100 standards
        - Part Number for the Old Main Controller is FG6-6531-000

over size truck